c00051

8bbbdfa

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 21495 Status: 0000 (u 0.005000 s 0.018000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 11732 Status: 0000 (u 0.005000 s 0.018000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 68078 Status: 0000 (u 0.005000 s 0.019000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 8359 Status: 0000 (u 0.005000 s 0.019000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 91778 Status: 0000 (u 0.006000 s 0.022000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 68019 Status: 0000 (u 0.005000 s 0.018000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.005) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 69412 Status: 0000 (u 0.006000 s 0.021000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 92388 Status: 0000 (u 0.005000 s 0.018000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 86792 Status: 0000 (u 0.005000 s 0.019000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 57226 Status: 0000 (u 0.005000 s 0.019000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 27319 Status: 0000 (u 0.006000 s 0.019000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 3945 Status: 0000 (u 0.005000 s 0.016000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.2 R 47460 Status: 0000 (u 0.007000 s 0.029000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.005) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 91403 Status: 0000 (u 0.005000 s 0.017000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 34761 Status: 0000 (u 0.006000 s 0.023000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 13041 Status: 0000 (u 0.005000 s 0.018000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 67552 Status: 0000 (u 0.005000 s 0.020000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.2 R 40846 Status: 0000 (u 0.008000 s 0.028000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.005) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision 8bbbdfa
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 24953 Status: 0000 (u 0.005000 s 0.018000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

d3baf27

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 16732 Status: 0000 (u 0.005000 s 0.020000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 93594 Status: 0000 (u 0.005000 s 0.018000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 70683 Status: 0000 (u 0.005000 s 0.018000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 20481 Status: 0000 (u 0.006000 s 0.024000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 97886 Status: 0000 (u 0.005000 s 0.017000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 17209 Status: 0000 (u 0.005000 s 0.019000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 39693 Status: 0000 (u 0.005000 s 0.019000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 15097 Status: 0000 (u 0.005000 s 0.017000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 81741 Status: 0000 (u 0.005000 s 0.017000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 58251 Status: 0000 (u 0.005000 s 0.019000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

bd4794e

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.2 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.2 CLI RX|varnish-trunk revision bd4794e
**** v1    0.2 CLI RX|
**** v1    0.2 CLI RX|Type 'help' for command list.
**** v1    0.2 CLI RX|Type 'quit' to close CLI session.
**** v1    0.2 CLI RX|Type 'start' to launch worker process.
**** v1    0.2 CLI TX|param.show cli_timeout
***  v1    0.2 CLI RX  200
**** v1    0.2 CLI RX|cli_timeout
**** v1    0.2 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.2 CLI RX|        Minimum is: 0.000
**** v1    0.2 CLI RX|
**** v1    0.2 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.2 CLI RX|        mgt_param.
**** v1    0.2 CLI RX|
**** v1    0.2 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.2 CLI RX|
**   v1    0.2 CLI 200 <param.show cli_timeout>
**   top   0.2 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.2 CLI TX|param.set cli_timeout 1m
***  v1    0.2 CLI RX  107
**** v1    0.2 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.2 CLI 107 <param.set cli_timeout 1m>
*    top   0.2 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.2 Wait
**** v1    0.2 CLI TX|backend.list
***  v1    0.2 CLI RX  101
**** v1    0.2 CLI RX|Unknown request in manager process (child not running).
**** v1    0.2 CLI RX|Type 'help' for more info.
**   v1    0.2 Stop
**** v1    0.2 CLI TX|stop
***  v1    0.2 CLI RX  300
**** v1    0.2 CLI RX|Child in state stopped
**** v1    0.2 CLI TX|status
***  v1    0.2 CLI RX  200
**** v1    0.2 CLI RX|Child in state stopped
**** v1    0.2 STDOUT poll 0x10
**   v1    0.2 R 24912 Status: 0000 (u 0.008000 s 0.029000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.005) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 86795 Status: 0000 (u 0.005000 s 0.018000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|varnish-trunk revision d3baf27
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 46067 Status: 0000 (u 0.005000 s 0.019000)
*    diag  0.0 ............................................................
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 78344 Status: 0000 (u 0.005000 s 0.018000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 24659 Status: 0000 (u 0.006000 s 0.020000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 91659 Status: 0000 (u 0.005000 s 0.022000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.005) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.2 R 94514 Status: 0000 (u 0.008000 s 0.029000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 33711 Status: 0000 (u 0.005000 s 0.019000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 67591 Status: 0000 (u 0.005000 s 0.020000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 38694 Status: 0000 (u 0.005000 s 0.018000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 72307 Status: 0000 (u 0.006000 s 0.021000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 10285 Status: 0000 (u 0.005000 s 0.019000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 65797 Status: 0000 (u 0.005000 s 0.019000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.003) signal=9

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 53139 Status: 0000 (u 0.006000 s 0.024000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.002) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.2 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.2 CLI RX|varnish-trunk revision bd4794e
**** v1    0.2 CLI RX|
**** v1    0.2 CLI RX|Type 'help' for command list.
**** v1    0.2 CLI RX|Type 'quit' to close CLI session.
**** v1    0.2 CLI RX|Type 'start' to launch worker process.
**** v1    0.2 CLI TX|param.show cli_timeout
***  v1    0.2 CLI RX  200
**** v1    0.2 CLI RX|cli_timeout
**** v1    0.2 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.2 CLI RX|        Minimum is: 0.000
**** v1    0.2 CLI RX|
**** v1    0.2 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.2 CLI RX|        mgt_param.
**** v1    0.2 CLI RX|
**** v1    0.2 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.2 CLI RX|
**   v1    0.2 CLI 200 <param.show cli_timeout>
**   top   0.2 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.2 CLI TX|param.set cli_timeout 1m
***  v1    0.2 CLI RX  107
**** v1    0.2 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.2 CLI 107 <param.set cli_timeout 1m>
*    top   0.2 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.2 Wait
**** v1    0.2 CLI TX|backend.list
***  v1    0.2 CLI RX  101
**** v1    0.2 CLI RX|Unknown request in manager process (child not running).
**** v1    0.2 CLI RX|Type 'help' for more info.
**   v1    0.2 Stop
**** v1    0.2 CLI TX|stop
***  v1    0.2 CLI RX  300
**** v1    0.2 CLI RX|Child in state stopped
**** v1    0.2 CLI TX|status
***  v1    0.2 CLI RX  200
**** v1    0.2 CLI RX|Child in state stopped
**** v1    0.2 STDOUT poll 0x10
**   v1    0.2 R 66176 Status: 0000 (u 0.008000 s 0.028000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/c00051.vtc starting
[...]
*    top   0.0 TEST test parameter protection
[...]
**** v1    0.1 CLI RX|-jsolaris,-smalloc,-smalloc,-hcritbit
**** v1    0.1 CLI RX|varnish-trunk revision bd4794e
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|Type 'help' for command list.
**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** v1    0.1 CLI TX|param.show cli_timeout
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|cli_timeout
**** v1    0.1 CLI RX|        Value is: 60.000 [seconds] (default)
**** v1    0.1 CLI RX|        Minimum is: 0.000
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        Timeout for the childs replies to CLI requests from the
**** v1    0.1 CLI RX|        mgt_param.
**** v1    0.1 CLI RX|
**** v1    0.1 CLI RX|        NB: This parameter is protected and can not be changed.
**** v1    0.1 CLI RX|
**   v1    0.1 CLI 200 <param.show cli_timeout>
**   top   0.1 === varnish v1 -clierr 107 "param.set cli_timeout 1m"
**** v1    0.1 CLI TX|param.set cli_timeout 1m
***  v1    0.1 CLI RX  107
**** v1    0.1 CLI RX|parameter "cli_timeout" is protected.
**   v1    0.1 CLI 107 <param.set cli_timeout 1m>
*    top   0.1 RESETTING after ../../../bin/varnishtest/tests/c00051.vtc
**   v1    0.1 Wait
**** v1    0.1 CLI TX|backend.list
***  v1    0.1 CLI RX  101
**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** v1    0.1 CLI RX|Type 'help' for more info.
**   v1    0.1 Stop
**** v1    0.1 CLI TX|stop
***  v1    0.1 CLI RX  300
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 CLI TX|status
***  v1    0.1 CLI RX  200
**** v1    0.1 CLI RX|Child in state stopped
**** v1    0.1 STDOUT poll 0x10
**   v1    0.1 R 52091 Status: 0000 (u 0.005000 s 0.018000)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc TIMED OUT (kill -9)
#    top  TEST ../../../bin/varnishtest/tests/c00051.vtc FAILED (60.004) signal=9