r02262

8bbbdfa

1 @ SunOS 5.11 i86pc 1.04 32_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 39806 Status: 0000 (u 0.004000 s 0.016000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.087) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 15452 Status: 0000 (u 0.005000 s 0.020000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.091) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 7980 Status: 0000 (u 0.005000 s 0.019000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.083) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 96019 Status: 0000 (u 0.004000 s 0.017000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.068) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 45101 Status: 0000 (u 0.006000 s 0.020000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.081) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 36700 Status: 0000 (u 0.005000 s 0.020000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.104) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 7284 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.003) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.083) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 82877 Status: 0000 (u 0.005000 s 0.020000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.081) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 99444 Status: 0000 (u 0.005000 s 0.021000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.005) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.096) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 22684 Status: 0000 (u 0.004000 s 0.015000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.074) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.2 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.2 CLI RX  200
**** top   5.1 shell_out|**** v1    0.2 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.2 CLI RX|
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|
**** top   5.1 shell_out|**   v1    0.2 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.2 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.2 Wait
**** top   5.1 shell_out|**** v1    0.2 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.2 CLI RX  101
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.2 Stop
**** top   5.1 shell_out|**** v1    0.2 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.2 CLI RX  300
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.2 CLI TX|status
**** top   5.1 shell_out|***  v1    0.2 CLI RX  200
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.2 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.2 R 91840 Status: 0000 (u 0.008000 s 0.028000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.005) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.140) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 43840 Status: 0000 (u 0.005000 s 0.017000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.080) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 51075 Status: 0000 (u 0.006000 s 0.024000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.095) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 47995 Status: 0000 (u 0.004000 s 0.015000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.077) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 93135 Status: 0000 (u 0.004000 s 0.016000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.076) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 56977 Status: 0000 (u 0.006000 s 0.019000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.089) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 71013 Status: 0000 (u 0.004000 s 0.016000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.077) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 3574 Status: 0000 (u 0.004000 s 0.015000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.077) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 84615 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.074) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 27298 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.078) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 18877 Status: 0000 (u 0.006000 s 0.022000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.003) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.077) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 57551 Status: 0000 (u 0.004000 s 0.014000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.071) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 34874 Status: 0000 (u 0.006000 s 0.023000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.092) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 33103 Status: 0000 (u 0.004000 s 0.015000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.071) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 35851 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.081) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 98701 Status: 0000 (u 0.004000 s 0.015000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.079) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 44984 Status: 0000 (u 0.006000 s 0.019000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.086) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 87238 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.086) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 44468 Status: 0000 (u 0.004000 s 0.015000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.073) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.2 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.2 CLI RX  200
**** top   5.1 shell_out|**** v1    0.2 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.2 CLI RX|
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.2 CLI RX|
**** top   5.1 shell_out|**   v1    0.2 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.2 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.2 Wait
**** top   5.1 shell_out|**** v1    0.2 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.2 CLI RX  101
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.2 Stop
**** top   5.1 shell_out|**** v1    0.2 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.2 CLI RX  300
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.2 CLI TX|status
**** top   5.1 shell_out|***  v1    0.2 CLI RX  200
**** top   5.1 shell_out|**** v1    0.2 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.2 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.2 R 93892 Status: 0000 (u 0.009000 s 0.032000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.006) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.129) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 54717 Status: 0000 (u 0.004000 s 0.017000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.074) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 6686 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.077) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 10343 Status: 0000 (u 0.005000 s 0.017000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.086) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 74360 Status: 0000 (u 0.004000 s 0.016000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.092) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 32327 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.077) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 23715 Status: 0000 (u 0.005000 s 0.019000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.076) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 20585 Status: 0000 (u 0.007000 s 0.025000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.005) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.118) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 99596 Status: 0000 (u 0.005000 s 0.019000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.005) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.082) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 43975 Status: 0000 (u 0.006000 s 0.020000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.003) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.100) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 21361 Status: 0000 (u 0.004000 s 0.016000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.084) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 21354 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.078) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 56562 Status: 0000 (u 0.004000 s 0.016000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.074) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 16573 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.081) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 11015 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.083) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 34209 Status: 0000 (u 0.004000 s 0.015000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.077) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 74472 Status: 0000 (u 0.004000 s 0.016000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.071) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 50333 Status: 0000 (u 0.004000 s 0.014000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.001) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.069) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 92012 Status: 0000 (u 0.006000 s 0.022000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.084) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 62262 Status: 0000 (u 0.005000 s 0.019000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.077) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 79505 Status: 0000 (u 0.004000 s 0.016000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.070) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 81685 Status: 0000 (u 0.005000 s 0.020000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.081) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 40948 Status: 0000 (u 0.005000 s 0.020000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.002) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.076) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 91536 Status: 0000 (u 0.006000 s 0.023000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.003) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.106) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.2 R 3559 Status: 0000 (u 0.008000 s 0.028000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.005) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.121) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 67634 Status: 0000 (u 0.005000 s 0.017000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.075) exit=2

1 @ SunOS 5.11 i86pc 1.04 64_gcc4.7 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 98382 Status: 0000 (u 0.005000 s 0.018000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.004) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.079) exit=2

1 @ SunOS 5.11 i86pc 1.04 32_sun12.4 uplex

*    top   0.0 TEST ../../../bin/varnishtest/tests/r02262.vtc starting
[...]
*    top   0.0 TEST varnishtest -p
[...]
**** top   5.1 shell_out|*    top   0.0 TEST _.vtc starting
[...]
**** top   5.1 shell_out|*    top   0.0 TEST -p
[...]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for command list.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'quit' to close CLI session.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'start' to launch worker process.
**** top   5.1 shell_out|**** v1    0.1 CLI TX|param.show default_ttl
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|default_ttl
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Value is: 42.000 [seconds]
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Default is: 120.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        Minimum is: 0.000
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        The TTL assigned to objects if neither the backend nor the VCL
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        code assigns one.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        NB: This parameter is evaluated only when objects are created.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|        To change it for all objects, restart or ban everything.
**** top   5.1 shell_out|**** v1    0.1 CLI RX|
**** top   5.1 shell_out|**   v1    0.1 CLI 200 <param.show default_ttl>
**** top   5.1 shell_out|*    top   0.1 RESETTING after _.vtc
**** top   5.1 shell_out|**   v1    0.1 Wait
**** top   5.1 shell_out|**** v1    0.1 CLI TX|backend.list
**** top   5.1 shell_out|***  v1    0.1 CLI RX  101
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Unknown request in manager process (child not running).
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Type 'help' for more info.
**** top   5.1 shell_out|**   v1    0.1 Stop
**** top   5.1 shell_out|**** v1    0.1 CLI TX|stop
**** top   5.1 shell_out|***  v1    0.1 CLI RX  300
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 CLI TX|status
**** top   5.1 shell_out|***  v1    0.1 CLI RX  200
**** top   5.1 shell_out|**** v1    0.1 CLI RX|Child in state stopped
**** top   5.1 shell_out|**** v1    0.1 STDOUT poll 0x10
**** top   5.1 shell_out|**   v1    0.1 R 58059 Status: 0000 (u 0.006000 s 0.023000)
**** top   5.1 shell_out|*    diag  0.0 .....
**** top   5.1 shell_out|#    top  TEST _.vtc TIMED OUT (kill -9)
**** top   5.1 shell_out|#    top  TEST _.vtc FAILED (5.003) signal=9
**** top   5.1 shell_status = 0x0002
---- top   5.1 shell_exit not as expected: got 0x0002 wanted 0x0000
*    top   5.1 RESETTING after ../../../bin/varnishtest/tests/r02262.vtc
*    top   5.1 TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED
#    top  TEST ../../../bin/varnishtest/tests/r02262.vtc FAILED (5.110) exit=2