Built in subroutines¶
Various built-in subroutines are called during processing of client-
and backend requests as well as upon vcl.load
and vcl.discard
.
See Varnish Processing States for a defailed graphical overview of the states and how they relate to core code functions and VCL subroutines.
client side¶
vcl_recv¶
Called at the beginning of a request, after the complete request has been received and parsed, after a restart or as the result of an ESI include.
Its purpose is to decide whether or not to serve the request, possibly modify it and decide on how to process it further. A backend hint may be set as a default for the backend processing side.
The vcl_recv subroutine may terminate with calling return()
on one
of the following keywords:
hash
Continue processing the object as a potential candidate for caching. Passes the control over to vcl_hash.
pass
Switch to pass mode. Control will eventually pass to vcl_pass.
pipe
Switch to pipe mode. Control will eventually pass to vcl_pipe.
synth(status code, reason)
Transition to vcl_synth with
resp.status
andresp.reason
being preset to the arguments ofsynth()
.purge
Purge the object and it’s variants. Control passes through vcl_hash to vcl_purge.
vcl_pipe¶
Called upon entering pipe mode. In this mode, the request is passed on to the backend, and any further data from both the client and backend is passed on unaltered until either end closes the connection. Basically, Varnish will degrade into a simple TCP proxy, shuffling bytes back and forth. For a connection in pipe mode, no other VCL subroutine will ever get called after vcl_pipe.
The vcl_pipe subroutine may terminate with calling return()
with one
of the following keywords:
pipe
Proceed with pipe mode.
synth(status code, reason)
Transition to vcl_synth with
resp.status
andresp.reason
being preset to the arguments ofsynth()
.
vcl_pass¶
Called upon entering pass mode. In this mode, the request is passed on to the backend, and the backend’s response is passed on to the client, but is not entered into the cache. Subsequent requests submitted over the same client connection are handled normally.
The vcl_pass subroutine may terminate with calling return()
with one
of the following keywords:
fetch
Proceed with pass mode - initiate a backend request.
restart
Restart the transaction. Increases the restart counter. If the number of restarts is higher than max_restarts Varnish emits a guru meditation error.
synth(status code, reason)
Transition to vcl_synth with
resp.status
andresp.reason
being preset to the arguments ofsynth()
.
vcl_hit¶
Called when a cache lookup is successful. The object being hit may be stale: It can have a zero or negative ttl with only grace or keep time left.
The vcl_hit subroutine may terminate with calling return()
with one of the following keywords:
deliver
Deliver the object. If it is stale, a background fetch to refresh it is triggered.
miss
Synchronously refresh the object from the backend despite the cache hit. Control will eventually pass to vcl_miss.
pass
Switch to pass mode. Control will eventually pass to vcl_pass.
restart
Restart the transaction. Increases the restart counter. If the number of restarts is higher than max_restarts Varnish emits a guru meditation error.
synth(status code, reason)
Transition to vcl_synth with
resp.status
andresp.reason
being preset to the arguments ofsynth()
.fetch
(deprecated)same as
miss
. Will get removed in a future version, triggers a VCL_Error log message.
vcl_miss¶
Called after a cache lookup if the requested document was not found in
the cache or if vcl_hit returned fetch
.
Its purpose is to decide whether or not to attempt to retrieve the document from the backend. A backend hint may be set as a default for the backend processing side.
The vcl_miss subroutine may terminate with calling return()
with one
of the following keywords:
fetch
Retrieve the requested object from the backend. Control will eventually pass to vcl_backend_fetch.
pass
Switch to pass mode. Control will eventually pass to vcl_pass.
restart
Restart the transaction. Increases the restart counter. If the number of restarts is higher than max_restarts Varnish emits a guru meditation error.
synth(status code, reason)
Transition to vcl_synth with
resp.status
andresp.reason
being preset to the arguments ofsynth()
.
vcl_hash¶
Called after vcl_recv to create a hash value for the request. This is used as a key to look up the object in Varnish.
The vcl_hash subroutine may only terminate with calling return(lookup)
:
lookup
Look up the object in cache. Control passes to vcl_purge when coming from a
purge
return in vcl_recv. Otherwise control passes to the next subroutine depending on the result of the cache lookup:
vcl_purge¶
Called after the purge has been executed and all its variants have been evited.
The vcl_purge subroutine may terminate with calling return()
with one
of the following keywords:
restart
Restart the transaction. Increases the restart counter. If the number of restarts is higher than max_restarts Varnish emits a guru meditation error.
synth(status code, reason)
Transition to vcl_synth with
resp.status
andresp.reason
being preset to the arguments ofsynth()
.
vcl_deliver¶
Called before any object except a vcl_synth result is delivered to the client.
The vcl_deliver subroutine may terminate with calling return()
with one
of the following keywords:
deliver
Deliver the object to the client.
restart
Restart the transaction. Increases the restart counter. If the number of restarts is higher than max_restarts Varnish emits a guru meditation error.
synth(status code, reason)
Transition to vcl_synth with
resp.status
andresp.reason
being preset to the arguments ofsynth()
.
vcl_synth¶
Called to deliver a synthetic object. A synthetic object is generated
in VCL, not fetched from the backend. Its body may be constructed using
the synthetic()
function.
A vcl_synth defined object never enters the cache, contrary to a vcl_backend_error defined object, which may end up in cache.
The subroutine may terminate with calling return()
with one of the
following keywords:
deliver
Directly deliver the object defined by vcl_synth to the client without calling vcl_deliver.
restart
Restart the transaction. Increases the restart counter. If the number of restarts is higher than max_restarts Varnish emits a guru meditation error.
Backend Side¶
vcl_backend_fetch¶
Called before sending the backend request. In this subroutine you typically alter the request before it gets to the backend.
The vcl_backend_fetch subroutine may terminate with calling
return()
with one of the following keywords:
fetch
Fetch the object from the backend.
abandon
Abandon the backend request. Unless the backend request was a background fetch, control is passed to vcl_synth on the client side with
resp.status
preset to 503.
Before calling vcl_backend_fetch, varnish core prepares the bereq backend request as follows:
Unless the request is a pass,
set
bereq.method
toGET
andbereq.proto
toHTTP/1.1
andset
bereq.http.Accept_Encoding
togzip
if http_gzip_support is enabled.
If there is an existing cache object to be revalidated, set
bereq.http.If-Modified-Since
from itsLast-Modified
header and/or setbereq.http.If-None-Match
from itsEtag
headerSet
bereq.http.X-Varnish
to the current transaction id (vxid)
These changes can be undone or modified in vcl_backend_fetch before the backend request is issued.
In particular, to cache non-GET requests, req.method
needs to be
saved to a header or variable in vcl_recv and restored to
bereq.method
. Notice that caching non-GET requests typically also
requires changing the cache key in vcl_hash e.g. by also
hashing the request method and/or request body.
HEAD request can be satisfied from cached GET responses.
vcl_backend_response¶
Called after the response headers have been successfully retrieved from the backend.
For a 304 response, varnish core code amends beresp
before calling
vcl_backend_response:
If the gzip status changed,
Content-Encoding
is unset and anyEtag
is weakenedAny headers not present in the 304 response are copied from the existing cache object.
Content-Length
is copied if present in the existing cache object and discarded otherwise.The status gets set to 200.
beresp.was_304 marks that this conditional response processing has happened.
Note: Backend conditional requests are independend of client conditional requests, so clients may receive 304 responses no matter if a backend request was conditional.
The vcl_backend_response subroutine may terminate with calling
return()
with one of the following keywords:
deliver
For a 304 response, create an updated cache object. Otherwise, fetch the object body from the backend and initiate delivery to any waiting client requests, possibly in parallel (streaming).
pass(duration)
Mark the object as a hit-for-pass for the given duration. Subsequent lookups hitting this object will be turned into passed transactions, as if
vcl_recv
had returnedpass
.abandon
Abandon the backend request. Unless the backend request was a background fetch, control is passed to vcl_synth on the client side with
resp.status
preset to 503.retry
Retry the backend transaction. Increases the retries counter. If the number of retries is higher than max_retries, control will be passed to vcl_backend_error.
vcl_backend_error¶
This subroutine is called if we fail the backend fetch or if max_retries has been exceeded.
A synthetic object is generated in VCL, whose body may be constructed
using the synthetic()
function.
The vcl_backend_error subroutine may terminate with calling return()
with one of the following keywords:
deliver
Deliver and possibly cache the object defined in vcl_backend_error as if it was fetched from the backend, also referred to as a “backend synth”.
retry
Retry the backend transaction. Increases the retries counter. If the number of retries is higher than max_retries, vcl_synth on the client side is called with
resp.status
preset to 503.
vcl.load / vcl.discard¶
vcl_init¶
Called when VCL is loaded, before any requests pass through it. Typically used to initialize VMODs.
The vcl_init subroutine may terminate with calling return()
with one of the following keywords:
ok
Normal return, VCL continues loading.
fail
Abort loading of this VCL.
vcl_fini¶
Called when VCL is discarded only after all requests have exited the VCL. Typically used to clean up VMODs.
The vcl_fini subroutine may terminate with calling return()
with one of the following keywords:
ok
Normal return, VCL will be discarded.