Varnish-2.1.4 Compiling Error

[Darvin Denmian]

Hello,

I'm trying to generate a RPM package of varnish-2.1.4 in a CentOS-5.5 OS,
64bits.
When I execute the command:

   rpmbuild -ba redhat/varnish.spec

I got the following message:

#### top  macro def tmpdir=/tmp/vtc.23005.6b8b4567
#### top  macro def bad_ip=10.255.255.255
#    top  TEST ././tests/v00017.vtc starting
#    top  TEST VCL compiler coverage test: vcc_acl.c
##   v1   Launch
###  v1   CMD: cd ../varnishd && ./varnishd -d -d -n
/tmp/vtc.23005.6b8b4567/v1 -p auto_restart=off -p syslog_cli_traffic=off -a
'127.0.0.1:0' -S /tmp/vtc.23005.6b8b4567/v1/_S -M '127.0.0.1 33880' -P
/tmp/vtc.23005.6b8b4567/v1/varnishd.pid
-sfile,/tmp/vtc.23005.6b8b4567/v1,10M
###  v1   debug| storage_file: filename:
/tmp/vtc.23005.6b8b4567/v1/varnish.PkiJW9 size 10 MB.\n
###  v1   debug| Creating new SHMFILE\n
###  v1   debug| Varnish on Linux,2.6.18-194.el5,x86_64,-sfile,-hcritbit\n
###  v1   debug| 200 239     \n
###  v1   debug| -----------------------------\n
###  v1   debug| Varnish HTTP accelerator CLI.\n
###  v1   debug| -----------------------------\n
###  v1   debug| Linux,2.6.18-194.el5,x86_64,-sfile,-hcritbit\n
###  v1   debug| \n
###  v1   debug| Type 'help' for command list.\n
###  v1   debug| Type 'quit' to close CLI session.\n
###  v1   debug| Type 'start' to launch worker process.\n
###  v1   debug| \n
###  v1   CLI connection fd = 4
###  v1   CLI RX  107
#### v1   CLI RX| ukncxlgzzoupwmsbtoxfavbapdvsnxoj\n
#### v1   CLI RX| \n
#### v1   CLI RX| Authentication required.\n
#### v1   CLI TX| auth
5bd6fb73ae081b54a8f6324801f50f9536e8981a9b6594fb22b496ef8b069ae7\n
###  v1   CLI RX  200
#### v1   CLI RX| -----------------------------\n
#### v1   CLI RX| Varnish HTTP accelerator CLI.\n
#### v1   CLI RX| -----------------------------\n
#### v1   CLI RX| Linux,2.6.18-194.el5,x86_64,-sfile,-hcritbit\n
#### v1   CLI RX| \n
#### v1   CLI RX| Type 'help' for command list.\n
#### v1   CLI RX| Type 'quit' to close CLI session.\n
#### v1   CLI RX| Type 'start' to launch worker process.\n
#### v1   CLI TX| vcl.inline vcl1 "\n\tbackend b { .host = \"127.0.0.1\";
}\n\tacl a { \"10.1.2.3\"/33; }\n\tsub vcl_recv { if (client.ip ~ a) {
return(pass); } }\n"
###  v1   CLI RX  106
#### v1   CLI RX| Message from VCC-compiler:\n
#### v1   CLI RX| Too wide mask (33) for IPv4 address(input Line 3 Pos 28)\n
#### v1   CLI RX|         acl a { "10.1.2.3"/33; }\n
#### v1   CLI RX| ---------------------------##---\n
#### v1   CLI RX| Running VCC-compiler failed, exit 1\n
#### v1   CLI RX| VCL compilation failed
##   v1   VCL compilation failed (as expected)
#### v1   CLI TX| vcl.inline vcl2 "\n\tbackend b { .host = \"127.0.0.1\";
}\n\tacl a { \"1::2\"/129; }\n\tsub vcl_recv { if (client.ip ~ a) {
return(pass); } }\n"
###  v1   CLI RX  106
#### v1   CLI RX| Message from VCC-compiler:\n
#### v1   CLI RX| Too wide mask (129) for IPv6 address(input Line 3 Pos
24)\n
#### v1   CLI RX|         acl a { "1::2"/129; }\n
#### v1   CLI RX| -----------------------###---\n
#### v1   CLI RX| Running VCC-compiler failed, exit 1\n
#### v1   CLI RX| VCL compilation failed
##   v1   VCL compilation failed (as expected)
#### v1   CLI TX| vcl.inline vcl3 "\n\tbackend b { .host = \"127.0.0.1\";
}\n\tacl a {\n\t\t\"1.2.3.4\"/31;\n\t\t\"1.2.3.4\"/31;\n\t}\n\tsub vcl_recv
{ if (client.ip ~ a) { return(pass); } }\n"
###  v1   CLI RX  200
#### v1   CLI RX| VCL compiled.
#### v1   CLI TX| vcl.use vcl3
###  v1   CLI RX  200
#### v1   CLI TX| vcl.inline vcl4 "\n\tbackend b { .host = \"127.0.0.1\";
}\n\tacl a {\n\t\t\"1.2.3.4\";\n\t\t!\"1.2.3.4\";\n\t}\n\tsub vcl_recv { if
(client.ip ~ a) { return(pass); } }\n"
###  v1   CLI RX  106
#### v1   CLI RX| Message from VCC-compiler:\n
#### v1   CLI RX| Conflicting ACL entries:\n
#### v1   CLI RX| (input Line 4 Pos 17)\n
#### v1   CLI RX|                 "1.2.3.4";\n
#### v1   CLI RX| ----------------#########-\n
#### v1   CLI RX| vs:\n
#### v1   CLI RX| (input Line 5 Pos 18)\n
#### v1   CLI RX|                 !"1.2.3.4";\n
#### v1   CLI RX| -----------------#########-\n
#### v1   CLI RX| Running VCC-compiler failed, exit 1\n
#### v1   CLI RX| VCL compilation failed
##   v1   VCL compilation failed (as expected)
#### v1   CLI TX| vcl.inline vcl5 "\n\tbackend b { .host = \"127.0.0.1\";
}\n\tacl a { \"...com\"; }\n\tsub vcl_recv { if (client.ip ~ a) {
return(pass); } }\n"
###  v1   CLI RX  106
#### v1   CLI RX| Message from VCC-compiler:\n
#### v1   CLI RX| DNS lookup(...com): Name or service not known\n
#### v1   CLI RX| (input Line 3 Pos 17)\n
#### v1   CLI RX|         acl a { "...com"; }\n
#### v1   CLI RX| ----------------########---\n
#### v1   CLI RX| Running VCC-compiler failed, exit 1\n
#### v1   CLI RX| VCL compilation failed
##   v1   VCL compilation failed (as expected)
#### v1   CLI TX| vcl.inline vcl6 "\n\tbackend b { .host = \"127.0.0.1\";
}\n\tacl a { \"10.1.2.\"; }\n\tsub vcl_recv { if (client.ip ~ a) {
return(pass); } }\n"
###  v1   CLI RX  200
#### v1   CLI RX| VCL compiled.
---- v1   VCL compilation got 200 expected 106
#    top  Test timed out
#    top  TEST ././tests/v00017.vtc FAILED
FAIL: ./tests/v00017.vtc
#    top  TEST ././tests/v00018.vtc passed (2.138s)

...

==============================================
1 of 192 tests failed
Please report to varnish-dev at varnish-cache.org
==============================================

Can somebody help me with this?

Thanks !
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.varnish-cache.org/lists/pipermail/varnish-bugs/attachments/20101022/ea598845/attachment.html>