[master] 89289cf Remove the gz* files.
Poul-Henning Kamp
phk at varnish-cache.org
Mon Feb 28 22:35:28 CET 2011
commit 89289cf59578650301a68f654016266a959ef123
Author: Poul-Henning Kamp <phk at FreeBSD.org>
Date: Mon Feb 28 21:34:57 2011 +0000
Remove the gz* files.
diff --git a/lib/libvgz/gzclose.c b/lib/libvgz/gzclose.c
deleted file mode 100644
index caeb99a..0000000
--- a/lib/libvgz/gzclose.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* gzclose.c -- zlib gzclose() function
- * Copyright (C) 2004, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* gzclose() is in a separate file so that it is linked in only if it is used.
- That way the other gzclose functions can be used instead to avoid linking in
- unneeded compression or decompression routines. */
-int ZEXPORT gzclose(file)
- gzFile file;
-{
-#ifndef NO_GZCOMPRESS
- gz_statep state;
-
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
-
- return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
-#else
- return gzclose_r(file);
-#endif
-}
diff --git a/lib/libvgz/gzguts.h b/lib/libvgz/gzguts.h
deleted file mode 100644
index 2f4bfec..0000000
--- a/lib/libvgz/gzguts.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004, 2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#ifdef _LARGEFILE64_SOURCE
-# ifndef _LARGEFILE_SOURCE
-# define _LARGEFILE_SOURCE 1
-# endif
-# ifdef _FILE_OFFSET_BITS
-# undef _FILE_OFFSET_BITS
-# endif
-#endif
-
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
-# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#else
-# define ZLIB_INTERNAL
-#endif
-
-#include <stdio.h>
-#include "vgz.h"
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-# include <limits.h>
-#endif
-#include <fcntl.h>
-
-#ifdef NO_DEFLATE /* for compatibility with old definition */
-# define NO_GZCOMPRESS
-#endif
-
-#ifdef _MSC_VER
-# include <io.h>
-# define vsnprintf _vsnprintf
-#endif
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-/* gz* functions always use library allocation functions */
-#ifndef STDC
- extern voidp malloc OF((uInt size));
- extern void free OF((voidpf ptr));
-#endif
-
-/* get errno and strerror definition */
-#if defined UNDER_CE
-# include <windows.h>
-# define zstrerror() gz_strwinerror((DWORD)GetLastError())
-#else
-# ifdef STDC
-# include <errno.h>
-# define zstrerror() strerror(errno)
-# else
-# define zstrerror() "stdio error (consult errno)"
-# endif
-#endif
-
-/* provide prototypes for these when building zlib without LFS */
-#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
- ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
- ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
- ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
- ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
-#endif
-
-/* default i/o buffer size -- double this for output when reading */
-#define GZBUFSIZE 8192
-
-/* gzip modes, also provide a little integrity check on the passed structure */
-#define GZ_NONE 0
-#define GZ_READ 7247
-#define GZ_WRITE 31153
-#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */
-
-/* values for gz_state how */
-#define LOOK 0 /* look for a gzip header */
-#define COPY 1 /* copy input directly */
-#define GZIP 2 /* decompress a gzip stream */
-
-/* internal gzip file state data structure */
-typedef struct {
- /* used for both reading and writing */
- int mode; /* see gzip modes above */
- int fd; /* file descriptor */
- char *path; /* path or fd for error messages */
- z_off64_t pos; /* current position in uncompressed data */
- unsigned size; /* buffer size, zero if not allocated yet */
- unsigned want; /* requested buffer size, default is GZBUFSIZE */
- unsigned char *in; /* input buffer */
- unsigned char *out; /* output buffer (double-sized when reading) */
- unsigned char *next; /* next output data to deliver or write */
- /* just for reading */
- unsigned have; /* amount of output data unused at next */
- int eof; /* true if end of input file reached */
- z_off64_t start; /* where the gzip data started, for rewinding */
- z_off64_t raw; /* where the raw data started, for seeking */
- int how; /* 0: get header, 1: copy, 2: decompress */
- int direct; /* true if last read direct, false if gzip */
- /* just for writing */
- int level; /* compression level */
- int strategy; /* compression strategy */
- /* seek request */
- z_off64_t skip; /* amount to skip (already rewound if backwards) */
- int seek; /* true if seek request pending */
- /* error information */
- int err; /* error code */
- char *msg; /* error message */
- /* zlib inflate or deflate stream */
- z_stream strm; /* stream structure in-place (not a pointer) */
-} gz_state;
-typedef gz_state FAR *gz_statep;
-
-/* shared functions */
-void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
-#if defined UNDER_CE
-char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
-#endif
-
-/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
- value -- needed when comparing unsigned to z_off64_t, which is signed
- (possible z_off64_t types off_t, off64_t, and long are all signed) */
-#ifdef INT_MAX
-# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
-#else
-unsigned ZLIB_INTERNAL gz_intmax OF((void));
-# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
-#endif
diff --git a/lib/libvgz/gzlib.c b/lib/libvgz/gzlib.c
deleted file mode 100644
index 3f6fb25..0000000
--- a/lib/libvgz/gzlib.c
+++ /dev/null
@@ -1,537 +0,0 @@
-/* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-# define LSEEK lseek64
-#else
-# define LSEEK lseek
-#endif
-
-/* Local functions */
-local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const char *, int, const char *));
-
-#if defined UNDER_CE
-
-/* Map the Windows error number in ERROR to a locale-dependent error message
- string and return a pointer to it. Typically, the values for ERROR come
- from GetLastError.
-
- The string pointed to shall not be modified by the application, but may be
- overwritten by a subsequent call to gz_strwinerror
-
- The gz_strwinerror function does not change the current setting of
- GetLastError. */
-char ZLIB_INTERNAL *gz_strwinerror (error)
- DWORD error;
-{
- static char buf[1024];
-
- wchar_t *msgbuf;
- DWORD lasterr = GetLastError();
- DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
- | FORMAT_MESSAGE_ALLOCATE_BUFFER,
- NULL,
- error,
- 0, /* Default language */
- (LPVOID)&msgbuf,
- 0,
- NULL);
- if (chars != 0) {
- /* If there is an \r\n appended, zap it. */
- if (chars >= 2
- && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
- chars -= 2;
- msgbuf[chars] = 0;
- }
-
- if (chars > sizeof (buf) - 1) {
- chars = sizeof (buf) - 1;
- msgbuf[chars] = 0;
- }
-
- wcstombs(buf, msgbuf, chars + 1);
- LocalFree(msgbuf);
- }
- else {
- sprintf(buf, "unknown win32 error (%ld)", error);
- }
-
- SetLastError(lasterr);
- return buf;
-}
-
-#endif /* UNDER_CE */
-
-/* Reset gzip file state */
-local void gz_reset(state)
- gz_statep state;
-{
- if (state->mode == GZ_READ) { /* for reading ... */
- state->have = 0; /* no output data available */
- state->eof = 0; /* not at end of file */
- state->how = LOOK; /* look for gzip header */
- state->direct = 1; /* default for empty file */
- }
- state->seek = 0; /* no seek request pending */
- gz_error(state, Z_OK, NULL); /* clear error */
- state->pos = 0; /* no uncompressed data yet */
- state->strm.avail_in = 0; /* no input data yet */
-}
-
-/* Open a gzip file either by name or file descriptor. */
-local gzFile gz_open(path, fd, mode)
- const char *path;
- int fd;
- const char *mode;
-{
- gz_statep state;
-
- /* allocate gzFile structure to return */
- state = malloc(sizeof(gz_state));
- if (state == NULL)
- return NULL;
- state->size = 0; /* no buffers allocated yet */
- state->want = GZBUFSIZE; /* requested buffer size */
- state->msg = NULL; /* no error message yet */
-
- /* interpret mode */
- state->mode = GZ_NONE;
- state->level = Z_DEFAULT_COMPRESSION;
- state->strategy = Z_DEFAULT_STRATEGY;
- while (*mode) {
- if (*mode >= '0' && *mode <= '9')
- state->level = *mode - '0';
- else
- switch (*mode) {
- case 'r':
- state->mode = GZ_READ;
- break;
-#ifndef NO_GZCOMPRESS
- case 'w':
- state->mode = GZ_WRITE;
- break;
- case 'a':
- state->mode = GZ_APPEND;
- break;
-#endif
- case '+': /* can't read and write at the same time */
- free(state);
- return NULL;
- case 'b': /* ignore -- will request binary anyway */
- break;
- case 'f':
- state->strategy = Z_FILTERED;
- break;
- case 'h':
- state->strategy = Z_HUFFMAN_ONLY;
- break;
- case 'R':
- state->strategy = Z_RLE;
- break;
- case 'F':
- state->strategy = Z_FIXED;
- default: /* could consider as an error, but just ignore */
- ;
- }
- mode++;
- }
-
- /* must provide an "r", "w", or "a" */
- if (state->mode == GZ_NONE) {
- free(state);
- return NULL;
- }
-
- /* save the path name for error messages */
- state->path = malloc(strlen(path) + 1);
- if (state->path == NULL) {
- free(state);
- return NULL;
- }
- strcpy(state->path, path);
-
- /* open the file with the appropriate mode (or just use fd) */
- state->fd = fd != -1 ? fd :
- open(path,
-#ifdef O_LARGEFILE
- O_LARGEFILE |
-#endif
-#ifdef O_BINARY
- O_BINARY |
-#endif
- (state->mode == GZ_READ ?
- O_RDONLY :
- (O_WRONLY | O_CREAT | (
- state->mode == GZ_WRITE ?
- O_TRUNC :
- O_APPEND))),
- 0666);
- if (state->fd == -1) {
- free(state->path);
- free(state);
- return NULL;
- }
- if (state->mode == GZ_APPEND)
- state->mode = GZ_WRITE; /* simplify later checks */
-
- /* save the current position for rewinding (only if reading) */
- if (state->mode == GZ_READ) {
- state->start = LSEEK(state->fd, 0, SEEK_CUR);
- if (state->start == -1) state->start = 0;
- }
-
- /* initialize stream */
- gz_reset(state);
-
- /* return stream */
- return (gzFile)state;
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen(path, mode)
- const char *path;
- const char *mode;
-{
- return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzopen64(path, mode)
- const char *path;
- const char *mode;
-{
- return gz_open(path, -1, mode);
-}
-
-/* -- see zlib.h -- */
-gzFile ZEXPORT gzdopen(fd, mode)
- int fd;
- const char *mode;
-{
- char *path; /* identifier for error messages */
- gzFile gz;
-
- if (fd == -1 || (path = malloc(7 + 3 * sizeof(int))) == NULL)
- return NULL;
- sprintf(path, "<fd:%d>", fd); /* for debugging */
- gz = gz_open(path, fd, mode);
- free(path);
- return gz;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzbuffer(file, size)
- gzFile file;
- unsigned size;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return -1;
-
- /* make sure we haven't already allocated memory */
- if (state->size != 0)
- return -1;
-
- /* check and set requested size */
- if (size == 0)
- return -1;
- state->want = size;
- return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzrewind(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ || state->err != Z_OK)
- return -1;
-
- /* back up and start over */
- if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
- return -1;
- gz_reset(state);
- return 0;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzseek64(file, offset, whence)
- gzFile file;
- z_off64_t offset;
- int whence;
-{
- unsigned n;
- z_off64_t ret;
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return -1;
-
- /* check that there's no error */
- if (state->err != Z_OK)
- return -1;
-
- /* can only seek from start or relative to current position */
- if (whence != SEEK_SET && whence != SEEK_CUR)
- return -1;
-
- /* normalize offset to a SEEK_CUR specification */
- if (whence == SEEK_SET)
- offset -= state->pos;
- else if (state->seek)
- offset += state->skip;
- state->seek = 0;
-
- /* if within raw area while reading, just go there */
- if (state->mode == GZ_READ && state->how == COPY &&
- state->pos + offset >= state->raw) {
- ret = LSEEK(state->fd, offset - state->have, SEEK_CUR);
- if (ret == -1)
- return -1;
- state->have = 0;
- state->eof = 0;
- state->seek = 0;
- gz_error(state, Z_OK, NULL);
- state->strm.avail_in = 0;
- state->pos += offset;
- return state->pos;
- }
-
- /* calculate skip amount, rewinding if needed for back seek when reading */
- if (offset < 0) {
- if (state->mode != GZ_READ) /* writing -- can't go backwards */
- return -1;
- offset += state->pos;
- if (offset < 0) /* before start of file! */
- return -1;
- if (gzrewind(file) == -1) /* rewind, then skip to offset */
- return -1;
- }
-
- /* if reading, skip what's in output buffer (one less gzgetc() check) */
- if (state->mode == GZ_READ) {
- n = GT_OFF(state->have) || (z_off64_t)state->have > offset ?
- (unsigned)offset : state->have;
- state->have -= n;
- state->next += n;
- state->pos += n;
- offset -= n;
- }
-
- /* request skip (if not zero) */
- if (offset) {
- state->seek = 1;
- state->skip = offset;
- }
- return state->pos + offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzseek(file, offset, whence)
- gzFile file;
- z_off_t offset;
- int whence;
-{
- z_off64_t ret;
-
- ret = gzseek64(file, (z_off64_t)offset, whence);
- return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gztell64(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return -1;
-
- /* return position */
- return state->pos + (state->seek ? state->skip : 0);
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gztell(file)
- gzFile file;
-{
- z_off64_t ret;
-
- ret = gztell64(file);
- return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-z_off64_t ZEXPORT gzoffset64(file)
- gzFile file;
-{
- z_off64_t offset;
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return -1;
-
- /* compute and return effective offset in file */
- offset = LSEEK(state->fd, 0, SEEK_CUR);
- if (offset == -1)
- return -1;
- if (state->mode == GZ_READ) /* reading */
- offset -= state->strm.avail_in; /* don't count buffered input */
- return offset;
-}
-
-/* -- see zlib.h -- */
-z_off_t ZEXPORT gzoffset(file)
- gzFile file;
-{
- z_off64_t ret;
-
- ret = gzoffset64(file);
- return ret == (z_off_t)ret ? (z_off_t)ret : -1;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzeof(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return 0;
-
- /* return end-of-file state */
- return state->mode == GZ_READ ?
- (state->eof && state->strm.avail_in == 0 && state->have == 0) : 0;
-}
-
-/* -- see zlib.h -- */
-const char * ZEXPORT gzerror(file, errnum)
- gzFile file;
- int *errnum;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return NULL;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return NULL;
-
- /* return error information */
- if (errnum != NULL)
- *errnum = state->err;
- return state->msg == NULL ? "" : state->msg;
-}
-
-/* -- see zlib.h -- */
-void ZEXPORT gzclearerr(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure and check integrity */
- if (file == NULL)
- return;
- state = (gz_statep)file;
- if (state->mode != GZ_READ && state->mode != GZ_WRITE)
- return;
-
- /* clear error and end-of-file */
- if (state->mode == GZ_READ)
- state->eof = 0;
- gz_error(state, Z_OK, NULL);
-}
-
-/* Create an error message in allocated memory and set state->err and
- state->msg accordingly. Free any previous error message already there. Do
- not try to free or allocate space if the error is Z_MEM_ERROR (out of
- memory). Simply save the error message as a static string. If there is an
- allocation failure constructing the error message, then convert the error to
- out of memory. */
-void ZLIB_INTERNAL gz_error(state, err, msg)
- gz_statep state;
- int err;
- const char *msg;
-{
- /* free previously allocated message and clear */
- if (state->msg != NULL) {
- if (state->err != Z_MEM_ERROR)
- free(state->msg);
- state->msg = NULL;
- }
-
- /* set error code, and if no message, then done */
- state->err = err;
- if (msg == NULL)
- return;
-
- /* for an out of memory error, save as static string */
- if (err == Z_MEM_ERROR) {
- state->msg = (char *)(uintptr_t)msg;
- return;
- }
-
- /* construct error message with path */
- if ((state->msg = malloc(strlen(state->path) + strlen(msg) + 3)) == NULL) {
- state->err = Z_MEM_ERROR;
- state->msg = (char *)(uintptr_t)"out of memory";
- return;
- }
- strcpy(state->msg, state->path);
- strcat(state->msg, ": ");
- strcat(state->msg, msg);
- return;
-}
-
-#ifndef INT_MAX
-/* portably return maximum value for an int (when limits.h presumed not
- available) -- we need to do this to cover cases where 2's complement not
- used, since C standard permits 1's complement and sign-bit representations,
- otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZLIB_INTERNAL gz_intmax()
-{
- unsigned p, q;
-
- p = 1;
- do {
- q = p;
- p <<= 1;
- p++;
- } while (p > q);
- return q >> 1;
-}
-#endif
diff --git a/lib/libvgz/gzread.c b/lib/libvgz/gzread.c
deleted file mode 100644
index 548201a..0000000
--- a/lib/libvgz/gzread.c
+++ /dev/null
@@ -1,653 +0,0 @@
-/* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
-local int gz_avail OF((gz_statep));
-local int gz_next4 OF((gz_statep, unsigned long *));
-local int gz_head OF((gz_statep));
-local int gz_decomp OF((gz_statep));
-local int gz_make OF((gz_statep));
-local int gz_skip OF((gz_statep, z_off64_t));
-
-/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from
- state->fd, and update state->eof, state->err, and state->msg as appropriate.
- This function needs to loop on read(), since read() is not guaranteed to
- read the number of bytes requested, depending on the type of descriptor. */
-local int gz_load(state, buf, len, have)
- gz_statep state;
- unsigned char *buf;
- unsigned len;
- unsigned *have;
-{
- int ret;
-
- *have = 0;
- do {
- ret = read(state->fd, buf + *have, len - *have);
- if (ret <= 0)
- break;
- *have += ret;
- } while (*have < len);
- if (ret < 0) {
- gz_error(state, Z_ERRNO, zstrerror());
- return -1;
- }
- if (ret == 0)
- state->eof = 1;
- return 0;
-}
-
-/* Load up input buffer and set eof flag if last data loaded -- return -1 on
- error, 0 otherwise. Note that the eof flag is set when the end of the input
- file is reached, even though there may be unused data in the buffer. Once
- that data has been used, no more attempts will be made to read the file.
- gz_avail() assumes that strm->avail_in == 0. */
-local int gz_avail(state)
- gz_statep state;
-{
- z_streamp strm = &(state->strm);
-
- if (state->err != Z_OK)
- return -1;
- if (state->eof == 0) {
- if (gz_load(state, state->in, state->size,
- (unsigned *)&(strm->avail_in)) == -1)
- return -1;
- strm->next_in = state->in;
- }
- return 0;
-}
-
-/* Get next byte from input, or -1 if end or error. */
-#define NEXT() ((strm->avail_in == 0 && gz_avail(state) == -1) ? -1 : \
- (strm->avail_in == 0 ? -1 : \
- (strm->avail_in--, *(strm->next_in)++)))
-
-/* Get a four-byte little-endian integer and return 0 on success and the value
- in *ret. Otherwise -1 is returned and *ret is not modified. */
-local int gz_next4(state, ret)
- gz_statep state;
- unsigned long *ret;
-{
- int ch;
- unsigned long val;
- z_streamp strm = &(state->strm);
-
- val = NEXT();
- val += (unsigned)NEXT() << 8;
- val += (unsigned long)NEXT() << 16;
- ch = NEXT();
- if (ch == -1)
- return -1;
- val += (unsigned long)ch << 24;
- *ret = val;
- return 0;
-}
-
-/* Look for gzip header, set up for inflate or copy. state->have must be zero.
- If this is the first time in, allocate required memory. state->how will be
- left unchanged if there is no more input data available, will be set to COPY
- if there is no gzip header and direct copying will be performed, or it will
- be set to GZIP for decompression, and the gzip header will be skipped so
- that the next available input data is the raw deflate stream. If direct
- copying, then leftover input data from the input buffer will be copied to
- the output buffer. In that case, all further file reads will be directly to
- either the output buffer or a user buffer. If decompressing, the inflate
- state and the check value will be initialized. gz_head() will return 0 on
- success or -1 on failure. Failures may include read errors or gzip header
- errors. */
-local int gz_head(state)
- gz_statep state;
-{
- z_streamp strm = &(state->strm);
- int flags;
- unsigned len;
-
- /* allocate read buffers and inflate memory */
- if (state->size == 0) {
- /* allocate buffers */
- state->in = malloc(state->want);
- state->out = malloc(state->want << 1);
- if (state->in == NULL || state->out == NULL) {
- if (state->out != NULL)
- free(state->out);
- if (state->in != NULL)
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- state->size = state->want;
-
- /* allocate inflate memory */
- state->strm.zalloc = Z_NULL;
- state->strm.zfree = Z_NULL;
- state->strm.opaque = Z_NULL;
- state->strm.avail_in = 0;
- state->strm.next_in = Z_NULL;
- if (inflateInit2(&(state->strm), -15) != Z_OK) { /* raw inflate */
- free(state->out);
- free(state->in);
- state->size = 0;
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- }
-
- /* get some data in the input buffer */
- if (strm->avail_in == 0) {
- if (gz_avail(state) == -1)
- return -1;
- if (strm->avail_in == 0)
- return 0;
- }
-
- /* look for the gzip magic header bytes 31 and 139 */
- if (strm->next_in[0] == 31) {
- strm->avail_in--;
- strm->next_in++;
- if (strm->avail_in == 0 && gz_avail(state) == -1)
- return -1;
- if (strm->avail_in && strm->next_in[0] == 139) {
- /* we have a gzip header, woo hoo! */
- strm->avail_in--;
- strm->next_in++;
-
- /* skip rest of header */
- if (NEXT() != 8) { /* compression method */
- gz_error(state, Z_DATA_ERROR, "unknown compression method");
- return -1;
- }
- flags = NEXT();
- if (flags & 0xe0) { /* reserved flag bits */
- gz_error(state, Z_DATA_ERROR, "unknown header flags set");
- return -1;
- }
- NEXT(); /* modification time */
- NEXT();
- NEXT();
- NEXT();
- NEXT(); /* extra flags */
- NEXT(); /* operating system */
- if (flags & 4) { /* extra field */
- len = (unsigned)NEXT();
- len += (unsigned)NEXT() << 8;
- while (len--)
- if (NEXT() < 0)
- break;
- }
- if (flags & 8) /* file name */
- while (NEXT() > 0)
- ;
- if (flags & 16) /* comment */
- while (NEXT() > 0)
- ;
- if (flags & 2) { /* header crc */
- NEXT();
- NEXT();
- }
- /* an unexpected end of file is not checked for here -- it will be
- noticed on the first request for uncompressed data */
-
- /* set up for decompression */
- inflateReset(strm);
- strm->adler = crc32(0L, Z_NULL, 0);
- state->how = GZIP;
- state->direct = 0;
- return 0;
- }
- else {
- /* not a gzip file -- save first byte (31) and fall to raw i/o */
- state->out[0] = 31;
- state->have = 1;
- }
- }
-
- /* doing raw i/o, save start of raw data for seeking, copy any leftover
- input to output -- this assumes that the output buffer is larger than
- the input buffer, which also assures space for gzungetc() */
- state->raw = state->pos;
- state->next = state->out;
- if (strm->avail_in) {
- memcpy(state->next + state->have, strm->next_in, strm->avail_in);
- state->have += strm->avail_in;
- strm->avail_in = 0;
- }
- state->how = COPY;
- state->direct = 1;
- return 0;
-}
-
-/* Decompress from input to the provided next_out and avail_out in the state.
- If the end of the compressed data is reached, then verify the gzip trailer
- check value and length (modulo 2^32). state->have and state->next are set
- to point to the just decompressed data, and the crc is updated. If the
- trailer is verified, state->how is reset to LOOK to look for the next gzip
- stream or raw data, once state->have is depleted. Returns 0 on success, -1
- on failure. Failures may include invalid compressed data or a failed gzip
- trailer verification. */
-local int gz_decomp(state)
- gz_statep state;
-{
- int ret;
- unsigned had;
- unsigned long crc, len;
- z_streamp strm = &(state->strm);
-
- /* fill output buffer up to end of deflate stream */
- had = strm->avail_out;
- do {
- /* get more input for inflate() */
- if (strm->avail_in == 0 && gz_avail(state) == -1)
- return -1;
- if (strm->avail_in == 0) {
- gz_error(state, Z_DATA_ERROR, "unexpected end of file");
- return -1;
- }
-
- /* decompress and handle errors */
- ret = inflate(strm, Z_NO_FLUSH);
- if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
- gz_error(state, Z_STREAM_ERROR,
- "internal error: inflate stream corrupt");
- return -1;
- }
- if (ret == Z_MEM_ERROR) {
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- if (ret == Z_DATA_ERROR) { /* deflate stream invalid */
- gz_error(state, Z_DATA_ERROR,
- strm->msg == NULL ? "compressed data error" : strm->msg);
- return -1;
- }
- } while (strm->avail_out && ret != Z_STREAM_END);
-
- /* update available output and crc check value */
- state->have = had - strm->avail_out;
- state->next = strm->next_out - state->have;
- strm->adler = crc32(strm->adler, state->next, state->have);
-
- /* check gzip trailer if at end of deflate stream */
- if (ret == Z_STREAM_END) {
- if (gz_next4(state, &crc) == -1 || gz_next4(state, &len) == -1) {
- gz_error(state, Z_DATA_ERROR, "unexpected end of file");
- return -1;
- }
- if (crc != strm->adler) {
- gz_error(state, Z_DATA_ERROR, "incorrect data check");
- return -1;
- }
- if (len != (strm->total_out & 0xffffffffL)) {
- gz_error(state, Z_DATA_ERROR, "incorrect length check");
- return -1;
- }
- state->how = LOOK; /* ready for next stream, once have is 0 (leave
- state->direct unchanged to remember how) */
- }
-
- /* good decompression */
- return 0;
-}
-
-/* Make data and put in the output buffer. Assumes that state->have == 0.
- Data is either copied from the input file or decompressed from the input
- file depending on state->how. If state->how is LOOK, then a gzip header is
- looked for (and skipped if found) to determine wither to copy or decompress.
- Returns -1 on error, otherwise 0. gz_make() will leave state->have as COPY
- or GZIP unless the end of the input file has been reached and all data has
- been processed. */
-local int gz_make(state)
- gz_statep state;
-{
- z_streamp strm = &(state->strm);
-
- if (state->how == LOOK) { /* look for gzip header */
- if (gz_head(state) == -1)
- return -1;
- if (state->have) /* got some data from gz_head() */
- return 0;
- }
- if (state->how == COPY) { /* straight copy */
- if (gz_load(state, state->out, state->size << 1, &(state->have)) == -1)
- return -1;
- state->next = state->out;
- }
- else if (state->how == GZIP) { /* decompress */
- strm->avail_out = state->size << 1;
- strm->next_out = state->out;
- if (gz_decomp(state) == -1)
- return -1;
- }
- return 0;
-}
-
-/* Skip len uncompressed bytes of output. Return -1 on error, 0 on success. */
-local int gz_skip(state, len)
- gz_statep state;
- z_off64_t len;
-{
- unsigned n;
-
- /* skip over len bytes or reach end-of-file, whichever comes first */
- while (len)
- /* skip over whatever is in output buffer */
- if (state->have) {
- n = GT_OFF(state->have) || (z_off64_t)state->have > len ?
- (unsigned)len : state->have;
- state->have -= n;
- state->next += n;
- state->pos += n;
- len -= n;
- }
-
- /* output buffer empty -- return if we're at the end of the input */
- else if (state->eof && state->strm.avail_in == 0)
- break;
-
- /* need more data to skip -- load up output buffer */
- else {
- /* get more output, looking for header if required */
- if (gz_make(state) == -1)
- return -1;
- }
- return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzread(file, buf, len)
- gzFile file;
- voidp buf;
- unsigned len;
-{
- unsigned got, n;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ || state->err != Z_OK)
- return -1;
-
- /* since an int is returned, make sure len fits in one, otherwise return
- with an error (this avoids the flaw in the interface) */
- if ((int)len < 0) {
- gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
- return -1;
- }
-
- /* if len is zero, avoid unnecessary operations */
- if (len == 0)
- return 0;
-
- /* process a skip request */
- if (state->seek) {
- state->seek = 0;
- if (gz_skip(state, state->skip) == -1)
- return -1;
- }
-
- /* get len bytes to buf, or less than len if at the end */
- got = 0;
- do {
- /* first just try copying data from the output buffer */
- if (state->have) {
- n = state->have > len ? len : state->have;
- memcpy(buf, state->next, n);
- state->next += n;
- state->have -= n;
- }
-
- /* output buffer empty -- return if we're at the end of the input */
- else if (state->eof && strm->avail_in == 0)
- break;
-
- /* need output data -- for small len or new stream load up our output
- buffer */
- else if (state->how == LOOK || len < (state->size << 1)) {
- /* get more output, looking for header if required */
- if (gz_make(state) == -1)
- return -1;
- continue; /* no progress yet -- go back to memcpy() above */
- /* the copy above assures that we will leave with space in the
- output buffer, allowing at least one gzungetc() to succeed */
- }
-
- /* large len -- read directly into user buffer */
- else if (state->how == COPY) { /* read directly */
- if (gz_load(state, buf, len, &n) == -1)
- return -1;
- }
-
- /* large len -- decompress directly into user buffer */
- else { /* state->how == GZIP */
- strm->avail_out = len;
- strm->next_out = buf;
- if (gz_decomp(state) == -1)
- return -1;
- n = state->have;
- state->have = 0;
- }
-
- /* update progress */
- len -= n;
- buf = (char *)buf + n;
- got += n;
- state->pos += n;
- } while (len);
-
- /* return number of bytes read into user buffer (will fit in int) */
- return (int)got;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzgetc(file)
- gzFile file;
-{
- int ret;
- unsigned char buf[1];
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ || state->err != Z_OK)
- return -1;
-
- /* try output buffer (no need to check for skip request) */
- if (state->have) {
- state->have--;
- state->pos++;
- return *(state->next)++;
- }
-
- /* nothing there -- try gzread() */
- ret = gzread(file, buf, 1);
- return ret < 1 ? -1 : buf[0];
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzungetc(c, file)
- int c;
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ || state->err != Z_OK)
- return -1;
-
- /* process a skip request */
- if (state->seek) {
- state->seek = 0;
- if (gz_skip(state, state->skip) == -1)
- return -1;
- }
-
- /* can't push EOF */
- if (c < 0)
- return -1;
-
- /* if output buffer empty, put byte at end (allows more pushing) */
- if (state->have == 0) {
- state->have = 1;
- state->next = state->out + (state->size << 1) - 1;
- state->next[0] = c;
- state->pos--;
- return c;
- }
-
- /* if no room, give up (must have already done a gzungetc()) */
- if (state->have == (state->size << 1)) {
- gz_error(state, Z_BUF_ERROR, "out of room to push characters");
- return -1;
- }
-
- /* slide output data if needed and insert byte before existing data */
- if (state->next == state->out) {
- unsigned char *src = state->out + state->have;
- unsigned char *dest = state->out + (state->size << 1);
- while (src > state->out)
- *--dest = *--src;
- state->next = dest;
- }
- state->have++;
- state->next--;
- state->next[0] = c;
- state->pos--;
- return c;
-}
-
-/* -- see zlib.h -- */
-char * ZEXPORT gzgets(file, buf, len)
- gzFile file;
- char *buf;
- int len;
-{
- unsigned left, n;
- char *str;
- unsigned char *eol;
- gz_statep state;
-
- /* check parameters and get internal structure */
- if (file == NULL || buf == NULL || len < 1)
- return NULL;
- state = (gz_statep)file;
-
- /* check that we're reading and that there's no error */
- if (state->mode != GZ_READ || state->err != Z_OK)
- return NULL;
-
- /* process a skip request */
- if (state->seek) {
- state->seek = 0;
- if (gz_skip(state, state->skip) == -1)
- return NULL;
- }
-
- /* copy output bytes up to new line or len - 1, whichever comes first --
- append a terminating zero to the string (we don't check for a zero in
- the contents, let the user worry about that) */
- str = buf;
- left = (unsigned)len - 1;
- if (left) do {
- /* assure that something is in the output buffer */
- if (state->have == 0) {
- if (gz_make(state) == -1)
- return NULL; /* error */
- if (state->have == 0) { /* end of file */
- if (buf == str) /* got bupkus */
- return NULL;
- break; /* got something -- return it */
- }
- }
-
- /* look for end-of-line in current output buffer */
- n = state->have > left ? left : state->have;
- eol = memchr(state->next, '\n', n);
- if (eol != NULL)
- n = (unsigned)(eol - state->next) + 1;
-
- /* copy through end-of-line, or remainder if not found */
- memcpy(buf, state->next, n);
- state->have -= n;
- state->next += n;
- state->pos += n;
- left -= n;
- buf += n;
- } while (left && eol == NULL);
-
- /* found end-of-line or out of space -- terminate string and return it */
- buf[0] = 0;
- return str;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzdirect(file)
- gzFile file;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
-
- /* check that we're reading */
- if (state->mode != GZ_READ)
- return 0;
-
- /* if the state is not known, but we can find out, then do so (this is
- mainly for right after a gzopen() or gzdopen()) */
- if (state->how == LOOK && state->have == 0)
- (void)gz_head(state);
-
- /* return 1 if reading direct, 0 if decompressing a gzip stream */
- return state->direct;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_r(file)
- gzFile file;
-{
- int ret;
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
-
- /* check that we're reading */
- if (state->mode != GZ_READ)
- return Z_STREAM_ERROR;
-
- /* free memory and close file */
- if (state->size) {
- inflateEnd(&(state->strm));
- free(state->out);
- free(state->in);
- }
- gz_error(state, Z_OK, NULL);
- free(state->path);
- ret = close(state->fd);
- free(state);
- return ret ? Z_ERRNO : Z_OK;
-}
diff --git a/lib/libvgz/gzwrite.c b/lib/libvgz/gzwrite.c
deleted file mode 100644
index 08bb9d8..0000000
--- a/lib/libvgz/gzwrite.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_init OF((gz_statep));
-local int gz_comp OF((gz_statep, int));
-local int gz_zero OF((gz_statep, z_off64_t));
-
-/* Initialize state for writing a gzip file. Mark initialization by setting
- state->size to non-zero. Return -1 on failure or 0 on success. */
-local int gz_init(state)
- gz_statep state;
-{
- int ret;
- z_streamp strm = &(state->strm);
-
- /* allocate input and output buffers */
- state->in = malloc(state->want);
- state->out = malloc(state->want);
- if (state->in == NULL || state->out == NULL) {
- if (state->out != NULL)
- free(state->out);
- if (state->in != NULL)
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
-
- /* allocate deflate memory, set up for gzip compression */
- strm->zalloc = Z_NULL;
- strm->zfree = Z_NULL;
- strm->opaque = Z_NULL;
- ret = deflateInit2(strm, state->level, Z_DEFLATED,
- 15 + 16, 8, state->strategy);
- if (ret != Z_OK) {
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
-
- /* mark state as initialized */
- state->size = state->want;
-
- /* initialize write buffer */
- strm->avail_out = state->size;
- strm->next_out = state->out;
- state->next = strm->next_out;
- return 0;
-}
-
-/* Compress whatever is at avail_in and next_in and write to the output file.
- Return -1 if there is an error writing to the output file, otherwise 0.
- flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH,
- then the deflate() state is reset to start a new gzip stream. */
-local int gz_comp(state, flush)
- gz_statep state;
- int flush;
-{
- int ret, got;
- unsigned have;
- z_streamp strm = &(state->strm);
-
- /* allocate memory if this is the first time through */
- if (state->size == 0 && gz_init(state) == -1)
- return -1;
-
- /* run deflate() on provided input until it produces no more output */
- ret = Z_OK;
- do {
- /* write out current buffer contents if full, or if flushing, but if
- doing Z_FINISH then don't write until we get to Z_STREAM_END */
- if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
- (flush != Z_FINISH || ret == Z_STREAM_END))) {
- have = (unsigned)(strm->next_out - state->next);
- if (have && ((got = write(state->fd, state->next, have)) < 0 ||
- (unsigned)got != have)) {
- gz_error(state, Z_ERRNO, zstrerror());
- return -1;
- }
- if (strm->avail_out == 0) {
- strm->avail_out = state->size;
- strm->next_out = state->out;
- }
- state->next = strm->next_out;
- }
-
- /* compress */
- have = strm->avail_out;
- ret = deflate(strm, flush);
- if (ret == Z_STREAM_ERROR) {
- gz_error(state, Z_STREAM_ERROR,
- "internal error: deflate stream corrupt");
- return -1;
- }
- have -= strm->avail_out;
- } while (have);
-
- /* if that completed a deflate stream, allow another to start */
- if (flush == Z_FINISH)
- deflateReset(strm);
-
- /* all done, no errors */
- return 0;
-}
-
-/* Compress len zeros to output. Return -1 on error, 0 on success. */
-local int gz_zero(state, len)
- gz_statep state;
- z_off64_t len;
-{
- int first;
- unsigned n;
- z_streamp strm = &(state->strm);
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return -1;
-
- /* compress len zeros (len guaranteed > 0) */
- first = 1;
- while (len) {
- n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
- (unsigned)len : state->size;
- if (first) {
- memset(state->in, 0, n);
- first = 0;
- }
- strm->avail_in = n;
- strm->next_in = state->in;
- state->pos += n;
- if (gz_comp(state, Z_NO_FLUSH) == -1)
- return -1;
- len -= n;
- }
- return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
- gzFile file;
- voidpc buf;
- unsigned len;
-{
- unsigned put = len;
- unsigned n;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* since an int is returned, make sure len fits in one, otherwise return
- with an error (this avoids the flaw in the interface) */
- if ((int)len < 0) {
- gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
- return 0;
- }
-
- /* if len is zero, avoid unnecessary operations */
- if (len == 0)
- return 0;
-
- /* allocate memory if this is the first time through */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* for small len, copy to input buffer, otherwise compress directly */
- if (len < state->size) {
- /* copy to input buffer, compress when full */
- do {
- if (strm->avail_in == 0)
- strm->next_in = state->in;
- n = state->size - strm->avail_in;
- if (n > len)
- n = len;
- memcpy(strm->next_in + strm->avail_in, buf, n);
- strm->avail_in += n;
- state->pos += n;
- buf = (char *)((uintptr_t)buf + n);
- len -= n;
- if (len && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
- } while (len);
- }
- else {
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* directly compress user buffer to file */
- strm->avail_in = len;
- strm->next_in = (voidp)(uintptr_t)buf;
- state->pos += len;
- if (gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
- }
-
- /* input was all buffered or compressed (put will fit in int) */
- return (int)put;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputc(file, c)
- gzFile file;
- int c;
-{
- unsigned char buf[1];
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return -1;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* try writing to input buffer for speed (state->size == 0 if buffer not
- initialized) */
- if (strm->avail_in < state->size) {
- if (strm->avail_in == 0)
- strm->next_in = state->in;
- strm->next_in[strm->avail_in++] = c;
- state->pos++;
- return c;
- }
-
- /* no room in buffer or not initialized, use gz_write() */
- buf[0] = c;
- if (gzwrite(file, buf, 1) != 1)
- return -1;
- return c;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputs(file, str)
- gzFile file;
- const char *str;
-{
- int ret;
- unsigned len;
-
- /* write string */
- len = (unsigned)strlen(str);
- ret = gzwrite(file, str, len);
- return ret == 0 && len != 0 ? -1 : ret;
-}
-
-#ifdef STDC
-#include <stdarg.h>
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
-{
- int size, len;
- gz_statep state;
- z_streamp strm;
- va_list va;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* make sure we have some buffer space */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* do the printf() into the input buffer, put length in len */
- size = (int)(state->size);
- state->in[size - 1] = 0;
- va_start(va, format);
-#ifdef NO_vsnprintf
-# ifdef HAS_vsprintf_void
- (void)vsprintf(state->in, format, va);
- va_end(va);
- for (len = 0; len < size; len++)
- if (state->in[len] == 0) break;
-# else
- len = vsprintf(state->in, format, va);
- va_end(va);
-# endif
-#else
-# ifdef HAS_vsnprintf_void
- (void)vsnprintf(state->in, size, format, va);
- va_end(va);
- len = strlen(state->in);
-# else
- len = vsnprintf((char *)(state->in), size, format, va);
- va_end(va);
-# endif
-#endif
-
- /* check that printf() results fit in buffer */
- if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
- return 0;
-
- /* update buffer and position, defer compression until needed */
- strm->avail_in = (unsigned)len;
- strm->next_in = state->in;
- state->pos += len;
- return len;
-}
-
-#else /* !STDC */
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
- gzFile file;
- const char *format;
- int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
- int size, len;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* make sure we have some buffer space */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* do the printf() into the input buffer, put length in len */
- size = (int)(state->size);
- state->in[size - 1] = 0;
-#ifdef NO_snprintf
-# ifdef HAS_sprintf_void
- sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
- for (len = 0; len < size; len++)
- if (state->in[len] == 0) break;
-# else
- len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-# endif
-#else
-# ifdef HAS_snprintf_void
- snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
- len = strlen(state->in);
-# else
- len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-# endif
-#endif
-
- /* check that printf() results fit in buffer */
- if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
- return 0;
-
- /* update buffer and position, defer compression until needed */
- strm->avail_in = (unsigned)len;
- strm->next_in = state->in;
- state->pos += len;
- return len;
-}
-
-#endif
-
-/* -- see zlib.h -- */
-int ZEXPORT gzflush(file, flush)
- gzFile file;
- int flush;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return Z_STREAM_ERROR;
-
- /* check flush parameter */
- if (flush < 0 || flush > Z_FINISH)
- return Z_STREAM_ERROR;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* compress remaining data with requested flush */
- gz_comp(state, flush);
- return state->err;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzsetparams(file, level, strategy)
- gzFile file;
- int level;
- int strategy;
-{
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return Z_STREAM_ERROR;
-
- /* if no change is requested, then do nothing */
- if (level == state->level && strategy == state->strategy)
- return Z_OK;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* change compression parameters for subsequent input */
- if (state->size) {
- /* flush previous input with previous parameters before changing */
- if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
- return state->err;
- deflateParams(strm, level, strategy);
- }
- state->level = level;
- state->strategy = strategy;
- return Z_OK;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_w(file)
- gzFile file;
-{
- int ret = 0;
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
-
- /* check that we're writing */
- if (state->mode != GZ_WRITE)
- return Z_STREAM_ERROR;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- ret += gz_zero(state, state->skip);
- }
-
- /* flush, free memory, and close file */
- ret += gz_comp(state, Z_FINISH);
- (void)deflateEnd(&(state->strm));
- free(state->out);
- free(state->in);
- gz_error(state, Z_OK, NULL);
- free(state->path);
- ret += close(state->fd);
- free(state);
- return ret ? Z_ERRNO : Z_OK;
-}
More information about the varnish-commit
mailing list