RPMS of varnish-2.1.3 available

[Angie T. Muhammad]

Hello,
 I am not sure if this bug is reproducable, but it is ironic because Varnish
starts successfully but the INIT script reports a FAIL.

# /etc/init.d/varnish start
# TTP accelerator:                         [FAILED]

# pidof varnishd
3383 3378

# cat /var/run/varnish.pid
3378

# /etc/init.d/varnish status
varnishd (pid  3378) is running...

# netstat -antpue | grep -i varnish
tcp        0      0 127.0.0.1:6082              0.0.0.0:*
LISTEN      0          13017      3378/varnishd
tcp        0      0 0.0.0.0:80                  0.0.0.0:*
LISTEN      0          13018      3383/varnishd

# telnet localhost 6082
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
200 154
-----------------------------
Varnish HTTP accelerator CLI.
-----------------------------
Type 'help' for command list.
Type 'quit' to close CLI session.


# /etc/init.d/varnish stop
Stopping varnish HTTP accelerator:                         [  OK  ]

# /etc/init.d/varnish start
# TTP accelerator:                         [FAILED]

I guarantee that after this fake FAILED varnish is working properly, but the
FAILED on the init script start is a bit scary at first sight. I tried
varnish packages on other machines and they are working fine. Nothing
special about the prompt of this machine that reports a fake failure. Its
specs are:

* Kernel 2.6.18-164.11.1.el5
* x86_64
* 4G RAMs
* CentOS 5.4

Is it reproducable with anyone? Any ideas ? It is not a big deal though,
simply wanted to report it.
Thanks.
------------------------------------------------------------------------------------------------------------
On Wed, Aug 25, 2010 at 4:07 AM, Angie T. Muhammad
<angie.tawfik at gmail.com>wrote:

> In test on a staging server. Will feed you back in case any unusual issue
> takes place.
> Thanks a lot :)
>
>
> On Tue, Aug 17, 2010 at 3:39 PM, Ingvar Hagelund <
> ingvar at redpill-linpro.com> wrote:
>
>>  I built RPMS of varnish-2.1.3 for RHEL4 and 5 and compatible derivates.
>> Source and binary packages for x86_64 are available at
>> http://sourceforge.net/projects/varnish/files/
>>
>> If anybody needs packages for other arches or RHEL versions, have a look
>> at
>> http://users.linpro.no/ingvar/varnish/ , or contact me.
>>
>> These packages have been tested in production, and should prove quite
>> stable, but feedback is as usual always very welcome.
>>
>> Ingvar
>>
>>
>> _______________________________________________
>> varnish-misc mailing list
>> varnish-misc at varnish-cache.org
>> http://lists.varnish-cache.org/mailman/listinfo/varnish-misc
>>
>
>
>
> --
> All the best,
> Angie T. Muhammad
> Linux Systems Engineer
> Al Masry Al Youm
> http://www.almasryalyoum.com/en
>



-- 
All the best,
Angie T. Muhammad
Linux Systems Engineer
Al Masry Al Youm
http://www.almasryalyoum.com/en
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.varnish-cache.org/lists/pipermail/varnish-misc/attachments/20100825/69c2b9e5/attachment-0003.html>