varnish with apache mod_auth

[Hernán Marsili]

Ok, so I finally make it work with the suggested rule.

On the vcl_recv I have:

if (req.http.x-forwarded-for) {

        set req.http.X-Forwarded-For = req.http.X-Forwarded-For + ", " +
client.ip;

set req.http.x-cdn-ip = regsub(req.http.X-Forwarded-For, "([^,]+), *([^
,]+)[ ,]?.*", "\2");

    } else {

        set req.http.X-Forwarded-For = client.ip;

set req.http.x-cdn-ip = regsub(req.http.X-Forwarded-For, "([^,]+), *([^
,]+)[ ,]?.*", "\2");

    }

I then use Apache remote_ip to listen to x-cd-ip with this:

 RemoteIPHeader x-cdn-ip

 RemoteIPTrustedProxy 127.0.0.1 172.31.29.204

I don't probable need the IF but since this was in place for some reason, I
just leave it.

It seems to be working just fine. What do you think?

On Fri, Mar 17, 2017 at 10:32 AM Andrei <lagged at gmail.com> wrote:

> Does the CDN not provide the IP you want in a separate header? Typically
> CDN's have custom headers for just that which you can use as well
>
> On Fri, Mar 17, 2017 at 3:31 PM, Guillaume Quintard <
> guillaume at varnish-software.com> wrote:
>
> If you have the ability to compile a vmod, you can use split() from
> vmod-str (disclaimer: I wrote that)
> https://github.com/gquintard/libvmod-str/blob/master/src/vmod_str.vcc
>
> otherwise, to get the second ip, something like :
>
> regsub(req.http.xff, "([^,]+), *([^ ,]+)[ ,]?.*", "\2")
>
> should work. Fell free to test, using regex101.com for example. or
> better, a Varnish Test case Case:
> https://gist.github.com/gquintard/ee47432bb8b5c97b615d973b57b6338e
> test it using: varnishtest foo.vtc
>
> --
> Guillaume Quintard
>
> On Fri, Mar 17, 2017 at 1:33 PM, Hernán Marsili <hernan at cmsmedios.com>
> wrote:
>
> Thank you! so, I figure I can parse the x-forwarded-for in which I have 3
> ips. The first one is the customer, the second one is the one 1 need (the
> CDN) and the third I think is the load balancer.
>
> I can assign it to a new header x-cdn-ip and use apache_remoteip to use
> that ip as the connecting ip.
>
> What do you think?
>
> Only problem here is to parse the second iP. I have something like this:
>
> set req.http.x-cdn-ip = regsub(req.http.X-Forwarded-For, "^([^,]+),?.*$",
> "\1");
>
> I was able to get the first IP but not the second only which is the one I
> need. Any one can point me in the right direction with the regsub?
>
> Thank you!
>
> On Fri, Mar 17, 2017 at 4:43 AM Andrei <lagged at gmail.com> wrote:
>
> Authenticated requests should typically bypass cache, unless you want to
> hash the related session id(s), however that can get "interesting". I
> suggest using an Apache module such as rpaf or remoteip in order for Apache
> to set the client IP from the X-Forwarded-For header set by Varnish. This
> way, you will not need to worry about whitelisting localhost, or other
> cucumbersome iptables rules, and your IP restrictions will work as intended.
>
> On Fri, Mar 17, 2017 at 1:32 AM, Jason Price <japrice at gmail.com> wrote:
>
> I don't believe there's a trivial way to do this.
>
> Varnish will return the cached response to any IP address that comes
> calling.  Even if the first request comes from a valid IP, which gets
> passed through via X-Forward or similar, and mod_auth is tweaked to respond
> to that, any subsequent request will not be seen by either apache or
> mod_auth at all.
>
> You have a few options:
> 1) IP Whitelists are a rather poor means of authentication.  Moving to
> something else might be prudent.  But that's not easy.
> 2) There are probably VMODs that do something similar.  If not and if the
> list of IPs isn't too long, you could limit the IPs in VCL rather than
> mod_auth.
> 3) Push the list of IP addresses that can connect to the external port
> down to IPTables or similar.
> 4) Push the list of IP addresses to external Firewall, or Security Group
> or whatever.
>
>
>
> On Thu, Mar 16, 2017 at 5:46 PM, Hernán Marsili <hernan at cmsmedios.com>
> wrote:
>
> Hi,
>
> We are having an issue with VARNISH and apache mod_auth. Varnish is on
> port 80 serving users and Apache is the backend.
>
> We have servers restricting access only to authenticated users or certain
> IP addresses. Since we installed Varnish the issue is that we need to
> enable 127.0.0.1 as a permitted IP (required ip rule) so the Varnish can
> fetch content. The problem, is that the real IP is not used and all the
> other rules does not apply.
>
> Bottom line, how can we still control who is requesting using MOD_AUTH and
> having Varnish?
>
> Regards
> Hernán.
>
> _______________________________________________
> varnish-misc mailing list
> varnish-misc at varnish-cache.org
> https://www.varnish-cache.org/lists/mailman/listinfo/varnish-misc
>
>
>
> _______________________________________________
> varnish-misc mailing list
> varnish-misc at varnish-cache.org
> https://www.varnish-cache.org/lists/mailman/listinfo/varnish-misc
>
>
>
> _______________________________________________
> varnish-misc mailing list
> varnish-misc at varnish-cache.org
> https://www.varnish-cache.org/lists/mailman/listinfo/varnish-misc
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.varnish-cache.org/lists/pipermail/varnish-misc/attachments/20170317/c8c7f9fa/attachment-0001.html>